Gas detecting equipments are devices that help in measuring and detecting a particular type or different types of gases if they are leaked in a certain premise. Whether it is capable of detecting one gas or multiple gases is dependent on their manufacturing. There are gas detectors that are fixed at the same there ones that are portable. But here we are going to discuss the different categories of leak that can happen.
[*]Large Leaks: If the leakage amount is too large, the leak detector can malfunction, making it important for the instrument and detection method to have a working range suitable for the problem. When a detector moves to full scale and cannot be reset unless it is removed from the leak, it has probably become swamped from excess leakage.
[*]Small Leaks: A smaller-sized leak may not register on a detection device because it is below the instrument’s operational range, making it difficult to find and repair. If a detector records zero leakage, this does not necessarily mean there is no leakage present, as the reading may be inaccurate due to the leak’s size. The parameters for a detection device should be determined according to minimum detectable leakage and maximum leak rate.
[*]System and Tracer-Fluid Features: If a gas or liquid tracer-fluid is used to track the movement of material, it is important for the tracer to be non-reactive to the system’s components so that it does not interfere with operational performance. Gases with a small molecular size and a high diffusion rate, such as helium, tend to be effective in these circumstances.
[*]Leak Location: If the purpose of the detection unit is to locate and pinpoint a leak, probes or portable detectors may be needed to scan the surface of the fluid passage. In vacuum systems, a tracer fluid can be effective for spotting the position of a leak, while pressure systems may be better served by bubble detectors, liquid penetrators, and chemical indicators.
[/list]
[*]Large Leaks: If the leakage amount is too large, the leak detector can malfunction, making it important for the instrument and detection method to have a working range suitable for the problem. When a detector moves to full scale and cannot be reset unless it is removed from the leak, it has probably become swamped from excess leakage.
[*]Small Leaks: A smaller-sized leak may not register on a detection device because it is below the instrument’s operational range, making it difficult to find and repair. If a detector records zero leakage, this does not necessarily mean there is no leakage present, as the reading may be inaccurate due to the leak’s size. The parameters for a detection device should be determined according to minimum detectable leakage and maximum leak rate.
[*]System and Tracer-Fluid Features: If a gas or liquid tracer-fluid is used to track the movement of material, it is important for the tracer to be non-reactive to the system’s components so that it does not interfere with operational performance. Gases with a small molecular size and a high diffusion rate, such as helium, tend to be effective in these circumstances.
[*]Leak Location: If the purpose of the detection unit is to locate and pinpoint a leak, probes or portable detectors may be needed to scan the surface of the fluid passage. In vacuum systems, a tracer fluid can be effective for spotting the position of a leak, while pressure systems may be better served by bubble detectors, liquid penetrators, and chemical indicators.
[/list]