Description
STEEL INDUSTRY IN INDIA
INDIAN STEEL INDUSTRY
Presented by: Pankaj Singh Ravikant Tiwari Suman Roy Swati Arora Swati Kamra
1
INTRODUCTION
? Steel is crucial to the development of any modern economy and is considered to be the backbone of human civilisation. ? It is a product of a large and technologically complex industry having strong forward and backward linkages in terms of material flows and income generation.
2
HISTORY
Source: IISI
Stages in Global Production of Steel
Global Steel Industry
? The current global steel industry is in its best position in comparing to last decades. The price has been rising continuously. ? The demand expectations for steel products are rapidly growing for coming years. The shares of steel industries are also in a high pace. ? The subprime crisis has lead to the recession in economy of different countries, which may lead to have a negative effect on whole steel industry in coming years.
? However steel production and consumption will be supported by continuous economic growth.
4
INDIAN STEEL GROWTH
Slowly and steadily
Steel industry reforms – particularly in 1991 and 1992 – have led to strong and sustainable growth in India’s steel industry. Since its independence, India has experienced steady growth in the steel industry, thanks in part to the successive governments that have supported the industry and pushed for its robust development.
40 35 30 25 20 15 10 5 0
1.1 26.2 24.2
Confidence
36.5
Decontrol
12.02 9.36
14.3
Controlled Regime
1.1 1.62
6.75 5.05 3.23
1951
1981
2005
BASED ON OWNERSHIP
PUBLIC
• • • • • • • SAIL VISAKHAPATNAM STEEL PLANT FERRO SCRAP NIGAM LIMITED BIRD GROUP OF COMPANIES SPONGE IRON INDIA LIMITED MECON LIMITED BHARAT REFRACTORIES LIMITED
PRIVATE
• • • • • TATA-CORUS ESSAR ISPAT JSW STEEL LIMITED MUKAND LIMITED
Steel production in india
• Indian steel industry is poised for rapid growth. • India’s share in world production of crude steel increased from 1.5% in 1981 to around 7.3% in 2008. • The private sector is considered engine of growth in the steel industry and technological changes and modernization are taking place in both the public and the private sector integrated steel plants in India.
AVERAGE COST AND ECONOMIES OF SCALE
Economies of scale are the cost advantages that a business obtains due to expansion.
• the average cost of production of the firm decreases as the output level increases • the firm would like to be at the minimum average cost point • the average cost is higher in long run than short run and company makes higher profit producing higher and higher levels of outputs .
Average cost
C
C1
output
Q
Q1
The increase in output from Q to Q2 causes a decrease in the average cost of each unit from c to C1.
Contd……..
• Suppose in TATA STEEL , the average cost per ton of steel at the minimum average cost point with the larger blast furnace may be 20 percent less than the average cost at the minimum average cost point with smaller blast furnace. • Due to technological constraints the average cost is assumed to start rising at some output level even in the long run—that is, the average cost curve is U-shaped even in the long run.
DEMAND OF STEEL
• Driven by a booming economy and concomitant demand levels, demand of steel has grown by 12.5 per cent during the last three years, well above the 6.9 percent envisaged in the National Steel Policy. • Demand of Steel amounted to 53.10 mt in 2007-08 compared to 49.50 mt in 2006-07, recording a growth rate of 7.3 per cent, which is higher than the world average.
ELASTICITY OF DEMAND OF STEEL
INELASTIC DEMAND
PRICE OF STEEL
P
P 1
O
Q Q1
DEMAND OF STEEL
SUPPLY OF STEEL
• India is the world’s fifth largest steel producer and its share is 3% plus in global steel output which is still very low. • China, the world’s biggest steelmaker, produces nearly ten times as much as India. • Over the past ten years India’s crude steel output rose nearly 7%per year to 55.3 million tons , while global crude steel output increased by 4% .
DEMAND SUPPLY MISMATCH
• India is one of the world’s top ten steelmakers its domestic output is insufficient to meet the demand in all segments. • Consumption of steel is very fast and as a consequence of the prospective dynamic economic growth. • Secondly, there is demand for high-quality products which India will not be able to supply in sufficient quantities for the foreseeable future.
MARKET ANALYSIS
? Concentration ratio of an industry is an indicator of the relative size of firms in relation to the industry as a whole. ? The 4 firm concentration ratio of the Iron and Steel Industry is 71%. ? Both homogenous product or product differentiation are possible ? There is a price war and price rigidity ? Price output decisions are very difficult and indeterminate. ? This implies that there is oligopoly in the industry as it is dominated by few major players
Export & Import of Steel in India
5
Quantity (in million tonnes)
4 3 2 1 0 2003-04 2004-05 2005-06 2006-07
YEAR
IMPORTS EXPORTS
Exports have grown fast and at a rate exceeding 25% per annum between 199192 and 2002-03. Thereafter, till 2006-07export levels stagnated at around 4-4.5 Million Tonnes per year. On the other hand, imports followed a different growth path. In spite of progressive reduction in customs duty levels after deregulation, imports remained around 1-2 Million Tonnes per year till 2003-04 and rose rapidly in the last two fiscals.
SUBSIDIES AND ISSUES OF COMPETITIVENESS
• India does not provide direct subsidies for exports, although indirect subsidies on the nature of exemption from tax and import duty are provided. • The Government of India implements the Export Promotion of Capital Goods (EPCG) scheme which provides for a reduction or exemption of customs duties and an exemption from excise taxes on imports of capital goods. The EPCG scheme has been countervailed in the US, Canada, as well as the EU.
16
SUBSIDIES AND ISSUES OF COMPETITIVENESS
• The income-tax benefits-related export activities are incorporated in sections 80HHC, 10A and 10B of the Income Tax Act. • The reserve bank of India has accordingly issued directions to commercial Banks to provide export credit both at pre- and postshipment stages. • India also administers a number of duty drawback schemes that allow for the remission or drawback of import charges levied on inputs that are consumed in the production of an exported product. Schemes such as duty Entitlement pass book Scheme (DEPB) and Duty free Replenishment certificate (DFRC) fall under this category.
17
ECONOMIC PARAMETERS ARE FAVOURABLE
PERFORMANCE PARAMETERS
Forex Reserve
GOOD
Overall GDP External Debt Financial Reforms
New Investment FDI Inflows Service sector Growth
Source : Citigroup estimates
FUTURE OUTLOOK
Savings inflation
Industrial Growth Economic reforms
Internal Debt Fiscal Deficit Agricultural Growth
BAD
CURRENT PERFORMANCE
GOOD
18
MERGERS & AQUISITIONS
• Arcelor - Mittal
– 32.2bn$ deal – Mittal pips Severstal
• Tata-Corus
– 11.3bn$ deal – Tatas pip CSN
19
SWOT ANALYSIS
Strengths 1. Availability of iron ore and coal 2. Low labour wage rates 3. Abundance of quality manpower 4. Mature production base
Weaknesses 1. Unscientific mining 2. Coking coal import dependence 3. Low R&D investment 4. Inadequate infrastructure
Opportunities 1. Unexplored rural market 2. Growing domestic demand 3. Exports 4. Consolidation
Threats 1. China becoming net exporter 2. Protectionism in the West 3. Dumping by competitors 4. Global economic slowdown
20
FACTORS HOLDING BACK THE INDIAN STEEL INDUSTRY
? Energy supply ? Problems procuring raw material inputs
? Inefficient transport system
? RECENT FINANCIAL CRISIS AND INDIAN STEEL INDUSTRY
21
IN SUMMARY..
• Indian steel industry exudes optimism but crisis should get over as soon as possible. • Investment in infrastructure is crucial to step up demand for steel.
• Supply may have to be rationalized in line with the demand (Dom + exports).
• Integrated Mills would hold the key in future growth of Indian Steel supplies. • New technologies to use indigenous natural resources would have to be developed.
22
THANK YOU
23
doc_940789664.ppt
STEEL INDUSTRY IN INDIA
INDIAN STEEL INDUSTRY
Presented by: Pankaj Singh Ravikant Tiwari Suman Roy Swati Arora Swati Kamra
1
INTRODUCTION
? Steel is crucial to the development of any modern economy and is considered to be the backbone of human civilisation. ? It is a product of a large and technologically complex industry having strong forward and backward linkages in terms of material flows and income generation.
2
HISTORY
Source: IISI
Stages in Global Production of Steel
Global Steel Industry
? The current global steel industry is in its best position in comparing to last decades. The price has been rising continuously. ? The demand expectations for steel products are rapidly growing for coming years. The shares of steel industries are also in a high pace. ? The subprime crisis has lead to the recession in economy of different countries, which may lead to have a negative effect on whole steel industry in coming years.
? However steel production and consumption will be supported by continuous economic growth.
4
INDIAN STEEL GROWTH
Slowly and steadily
Steel industry reforms – particularly in 1991 and 1992 – have led to strong and sustainable growth in India’s steel industry. Since its independence, India has experienced steady growth in the steel industry, thanks in part to the successive governments that have supported the industry and pushed for its robust development.
40 35 30 25 20 15 10 5 0
1.1 26.2 24.2
Confidence
36.5
Decontrol
12.02 9.36
14.3
Controlled Regime
1.1 1.62
6.75 5.05 3.23
1951
1981
2005
BASED ON OWNERSHIP
PUBLIC
• • • • • • • SAIL VISAKHAPATNAM STEEL PLANT FERRO SCRAP NIGAM LIMITED BIRD GROUP OF COMPANIES SPONGE IRON INDIA LIMITED MECON LIMITED BHARAT REFRACTORIES LIMITED
PRIVATE
• • • • • TATA-CORUS ESSAR ISPAT JSW STEEL LIMITED MUKAND LIMITED
Steel production in india
• Indian steel industry is poised for rapid growth. • India’s share in world production of crude steel increased from 1.5% in 1981 to around 7.3% in 2008. • The private sector is considered engine of growth in the steel industry and technological changes and modernization are taking place in both the public and the private sector integrated steel plants in India.
AVERAGE COST AND ECONOMIES OF SCALE
Economies of scale are the cost advantages that a business obtains due to expansion.
• the average cost of production of the firm decreases as the output level increases • the firm would like to be at the minimum average cost point • the average cost is higher in long run than short run and company makes higher profit producing higher and higher levels of outputs .
Average cost
C
C1
output
Q
Q1
The increase in output from Q to Q2 causes a decrease in the average cost of each unit from c to C1.
Contd……..
• Suppose in TATA STEEL , the average cost per ton of steel at the minimum average cost point with the larger blast furnace may be 20 percent less than the average cost at the minimum average cost point with smaller blast furnace. • Due to technological constraints the average cost is assumed to start rising at some output level even in the long run—that is, the average cost curve is U-shaped even in the long run.
DEMAND OF STEEL
• Driven by a booming economy and concomitant demand levels, demand of steel has grown by 12.5 per cent during the last three years, well above the 6.9 percent envisaged in the National Steel Policy. • Demand of Steel amounted to 53.10 mt in 2007-08 compared to 49.50 mt in 2006-07, recording a growth rate of 7.3 per cent, which is higher than the world average.
ELASTICITY OF DEMAND OF STEEL
INELASTIC DEMAND
PRICE OF STEEL
P
P 1
O
Q Q1
DEMAND OF STEEL
SUPPLY OF STEEL
• India is the world’s fifth largest steel producer and its share is 3% plus in global steel output which is still very low. • China, the world’s biggest steelmaker, produces nearly ten times as much as India. • Over the past ten years India’s crude steel output rose nearly 7%per year to 55.3 million tons , while global crude steel output increased by 4% .
DEMAND SUPPLY MISMATCH
• India is one of the world’s top ten steelmakers its domestic output is insufficient to meet the demand in all segments. • Consumption of steel is very fast and as a consequence of the prospective dynamic economic growth. • Secondly, there is demand for high-quality products which India will not be able to supply in sufficient quantities for the foreseeable future.
MARKET ANALYSIS
? Concentration ratio of an industry is an indicator of the relative size of firms in relation to the industry as a whole. ? The 4 firm concentration ratio of the Iron and Steel Industry is 71%. ? Both homogenous product or product differentiation are possible ? There is a price war and price rigidity ? Price output decisions are very difficult and indeterminate. ? This implies that there is oligopoly in the industry as it is dominated by few major players
Export & Import of Steel in India
5
Quantity (in million tonnes)
4 3 2 1 0 2003-04 2004-05 2005-06 2006-07
YEAR
IMPORTS EXPORTS
Exports have grown fast and at a rate exceeding 25% per annum between 199192 and 2002-03. Thereafter, till 2006-07export levels stagnated at around 4-4.5 Million Tonnes per year. On the other hand, imports followed a different growth path. In spite of progressive reduction in customs duty levels after deregulation, imports remained around 1-2 Million Tonnes per year till 2003-04 and rose rapidly in the last two fiscals.
SUBSIDIES AND ISSUES OF COMPETITIVENESS
• India does not provide direct subsidies for exports, although indirect subsidies on the nature of exemption from tax and import duty are provided. • The Government of India implements the Export Promotion of Capital Goods (EPCG) scheme which provides for a reduction or exemption of customs duties and an exemption from excise taxes on imports of capital goods. The EPCG scheme has been countervailed in the US, Canada, as well as the EU.
16
SUBSIDIES AND ISSUES OF COMPETITIVENESS
• The income-tax benefits-related export activities are incorporated in sections 80HHC, 10A and 10B of the Income Tax Act. • The reserve bank of India has accordingly issued directions to commercial Banks to provide export credit both at pre- and postshipment stages. • India also administers a number of duty drawback schemes that allow for the remission or drawback of import charges levied on inputs that are consumed in the production of an exported product. Schemes such as duty Entitlement pass book Scheme (DEPB) and Duty free Replenishment certificate (DFRC) fall under this category.
17
ECONOMIC PARAMETERS ARE FAVOURABLE
PERFORMANCE PARAMETERS
Forex Reserve
GOOD
Overall GDP External Debt Financial Reforms
New Investment FDI Inflows Service sector Growth
Source : Citigroup estimates
FUTURE OUTLOOK
Savings inflation
Industrial Growth Economic reforms
Internal Debt Fiscal Deficit Agricultural Growth
BAD
CURRENT PERFORMANCE
GOOD
18
MERGERS & AQUISITIONS
• Arcelor - Mittal
– 32.2bn$ deal – Mittal pips Severstal
• Tata-Corus
– 11.3bn$ deal – Tatas pip CSN
19
SWOT ANALYSIS
Strengths 1. Availability of iron ore and coal 2. Low labour wage rates 3. Abundance of quality manpower 4. Mature production base
Weaknesses 1. Unscientific mining 2. Coking coal import dependence 3. Low R&D investment 4. Inadequate infrastructure
Opportunities 1. Unexplored rural market 2. Growing domestic demand 3. Exports 4. Consolidation
Threats 1. China becoming net exporter 2. Protectionism in the West 3. Dumping by competitors 4. Global economic slowdown
20
FACTORS HOLDING BACK THE INDIAN STEEL INDUSTRY
? Energy supply ? Problems procuring raw material inputs
? Inefficient transport system
? RECENT FINANCIAL CRISIS AND INDIAN STEEL INDUSTRY
21
IN SUMMARY..
• Indian steel industry exudes optimism but crisis should get over as soon as possible. • Investment in infrastructure is crucial to step up demand for steel.
• Supply may have to be rationalized in line with the demand (Dom + exports).
• Integrated Mills would hold the key in future growth of Indian Steel supplies. • New technologies to use indigenous natural resources would have to be developed.
22
THANK YOU
23
doc_940789664.ppt