Rolled Throughput Yield (RTY

[abhishreshthaa]

• Another concept that is used as a metric in six sigma is Rolled Throughput Yield (RTY). Let us assume that a part goes through ten operations


. At each stage 99% parts are good and 1% are reject. It is not very difficult to calculate that we get good 90.43 % parts at the end of the tenth stage.


This means if we start with a batch of 1000 parts, we get 904 good parts and scrap or rework 96 parts. The RTY of the process is 90.43%.

 

[jitendra05]

• Another concept that is used as a metric in six sigma is Rolled Throughput Yield (RTY). Let us assume that a part goes through ten operations


. At each stage 99% parts are good and 1% are reject. It is not very difficult to calculate that we get good 90.43 % parts at the end of the tenth stage.


This means if we start with a batch of 1000 parts, we get 904 good parts and scrap or rework 96 parts. The RTY of the process is 90.43%.

Hey abhi, thanks for sharing this important information and explaining about this concept. Well, i also did a search regarding the same topic and found out some important information. I am uploading the document which will give some more detailed information on Rolled Throughput Yield.