Description
B.Ed., Computer Project
INDEX
S.No 1. . Particulars Page No:
INTRODUCTION OF THE PROJECT PROJECT STATEMENT
IMPORTANCE OF THE PROJECT INTRODUCTION TO MS – POWER POINT SOFTWARE USED IN THE PROJECT METHODOLIGICAL PROCEDURE FOLLOWED IN THE PROJECT PRESENTATION OF THE TOPIC CONCLUSION
2 3 4 16 19 20 25 26
2.
3. 4. 5.
6. 7. 8.
BIBLOGRAPHY
1
INTRODUCTION OF THE PROJECT PROJECT STATEMENT Before starting every project is planning is done. Planning project is a very important task and should be taken up with great care as the Efficiency of the Whole project largely depends up on its planning. While planning a project each And every detail should be worked out in anticipation and should consider carefully considering all the relevant Provisions in advance.
Now a day’s more stress being given to bring the teacher forward to open their own school and students after completing their course are Encouraged to open their own schools
Hence the study on the project planning has become more important. For this reason more universities and boards have intrudes the project work syllabus in the year. This chapter will help in planning the project for the student as well as to the teacher who want to start the new schools and facilities in formulating to correct approach to take up the job of project planning consists of the following important steps for project analysis of a particular project or established.
2
Importance of the project
To project will help the school organization in many ways. This project will help the administrators to save their time regarding little teaching. This project will help them, to refer to the to the particular information about topic at any time. The organization can decrease burdens on their hands. By the computerization of the teaching can be updated time to time.
There is no necessary to maintain written drawings on black board, with the help of this project we can get the information the particular student at any time. When we can compare each and every issue about this topic is preserved carefully in the computer. Even and unknown person can handle the system and use project.
In the school by the end of the year the old lesions have to be cleared. By using this project there we cleared the lesion within the seconds. There is the no necessary for the school to create a new lesion for the next year. With the help of the project we can only. These projects will allow us to add new slides and delete the slides and also to change the information of the student whenever necessary. The latest versions of software use a number of shared office resources like any other application.
3
Introduction to the project
As a part of project for me and my co- student teachers took “project on Power point”. We utilize the lab Successfully. hours without any fail and complete the project work
Before starting every project its planning is done. Planning project is a very Important task and should be taken up with great care as the efficiency of Whole project largely depends up on its planning. While planning a project Each and every details should be worked out in anticipation and should be consider carefully considering all the relevant provisions in advance. Now a day more stress being given to bring teacher forward to open their own schools and students after completing their courses are also being encourage to open their own schools. Hence the study of the project planning has became more important. For this reason most of the universities and boards have introduce the project work in the syllabus of the year. This chapter help in planning the project for the student as well as to the teachers who want to start new schools and facilities in formulating the approach to take up the job of project planning consists of the fallowing important steps. For project analysis of a particular project or establishment.
4
M S Power Point
Introduction:
A presentation is a form of communication , used to convey a concept, subject, plan or scheme information to an audience. It is need for formally Introduced a subject to an audience A presentation can use a combination Of voice, text, charts, video clips, and sound to communicate the selected Subject realistically. Depending on the length of time. Presentation are consider an ideal means of communication as they greatly enhance the structure of the subjects material to be conveyed to the audience. The act of the writing the subject material of the presentations are conducted by a presenter to divided the subject information into several pages presentations are conducted by a presenter and are made to an audience. The audience can range from one person to hall full of people. The presenter makes a
Presentation on a chosen subject. A presentation can either be entirely vocal, or some visual aids and subject note can assist the presenter. power point presentation graphics package which facilities the formulation of presentation.
the presenter commentary can also the added with textual slides. Charts pictures and voice to make effectively the audience. The slides Created thought a presentation graphics package are neat consistent and
5
Can be made extremely attractive that a power point 97 presentation is A collection of slides handout, speakers notes and in the presentation out Line al in one file. Advantages:
• • • •
In M S Power Point we can create different types of slides In M S Power Point we can add narration to the slide. In M S Power Point we can add video clips , pictures, text, etc. In M S Power Point important the slide from your hard disk are
FROM INTERNET. • • • • In M S Power Point we can add special effects to the slides. In M S Power Point we can insert Micro soft excel sheets. In M S Power Point we can insert Micro soft word tables. In M S Power Point we can convert colors slides into black and white SLIDES. Procedure of Developing a Power Point Presentation: WHAT IS AUTO CONTENT WIZARD: the auto content wizard will guides You to select from many new rebuilt content templates, and it provides Ideas , starter text, formatting, and organization for your presentation. The templates cover a wide verity of topics including status or team Meetings, certificates, calendars
6
of events, and even web home pages The wizard also gives tips on how to become a better presenter. Presentation based on a design templates: On the file menu click new , and then the presentation design tab. Scroll To see all design templates, click the one you want ,and then click ok. scroll To see all design layouts and then select a layout for your title slide. Type The title and any other content you want on t he title slide. On the common task tool bar, click new slide, and then select a layout for the next slide. Presentation Based on a Blank presentation : To create a blank presentation click on ht define menu, click new and Then click the General tab. Double click blank presentation, and then select a lay out for your first slide. The new presentation uses the color Scheme and title and styles of the default presentation. Type the title and Any other content you want on the title slide. When you finish, click save on the file menu name your presentation, and then click save, to see how your presentation will look, click slide show option from slide show menu. Starting Microsoft PowerPoint • TWO WAYS 1. Double click on the Microsoft PowerPoint icon on the Desktop.
7
2.
Click on start--> programs-- >Microsoft Office -> Microsoft PowerPoint
Opening an Existing presentation 1. select Open An Existing Presentation from the picture above 2. Click on your presentation in the white box below step 1 o if you do not see your presentation in the white box, Select More Files and hit OK.
8
o Locate you existing presentation and hit the Open button Create a Blank Presentation After you select Blank Presentation a window pops up asking You to select the layout of the first slide.
Navigating While In Your First Slide Show forward navigation • Simply click on the left mouse button or hit the enter button on your Key board.
Reverse navigation;
•
Hit the back space on the key board.
Exiting the show:
•
Hit the ESC button on the keyboard
9
Screen layout: The power point screen layout in Normal view. Views: Power point gives you four screen layouts for contacting your
presentation in addition to the slide show. You can select the page view by clicking the button just above the formatting toolbar and the bottom of the page. Normal view: This screen is split in to three sections showing the presentation outline on the left , the slide in the main window , and notes at the button.
Slide view: The slide view displays each slide on the screen and is helpful for Adding images, formatting text , and adding back ground styles. Slide sorter view: A small image of each slide displayed in slide sorter view. Slide can Easily be ordered and sorted from this screen.
10
Working with slides: New slide: This option is used to insert new slide in the current presentation. This Opting prompts you to click a slide layout. And then insert a new slide After the active slide. To do this on insert menu and then click new slide option. Duplicate slide: You can quickly duplicate object while you are working on a slide. or you Can make lots of duplicate s and use them to create arrays and sweeps. you Can also copy on object to another slide. Click the object you want to duplicate -ate. On Edit menu , click duplicate. to make additional duplicates. Delete slide: This option is used to delete the selected slide.to do this select the slide That you want to delete and then click on Edit menu. Then click delete Slide. Inserting Clipart & Pictures: 1. Display the slide you want to add a picture to. 2. click insert all the top of the screen 3. select picture 4. select clipart 5. click the category you want 6. click the picture you want 7. click insert clip on the short cut menu. 8. when you are finished using the clip gallery, click the close button on the clip gallery title bar 9. step 1-4 are very similar when inserting other pictures, objects ,movies, sounds, and charts.
11
Color schemes:
• • •
select the format slide color scheme from the menu bar. Click one of the present color scheme thumbnail images in the color Click the preview button to see hoe the scheme will appear on the slide. To make a changes to the color scheme , click the custom tab on the dialog box. Change the color of the slide elements by selecting the color button. Highlight on of the color from the text and line color choice and click ok when finished.
•
• •
Back ground:
Follow these steps to add background Color and patterns to a slide
• •
Select format background from the menu bar. Select color from the drop – down below the back ground fill preview or choose more colors…. For a large selection. Select fill effects from the drop-down menu to add gradistes, texture , patterns, or a to the back ground.
•
12
Viewing the slide show:
You can view your slide show by any of the following ways: • • • • Click slide show at the lower left of the power point window. On the slideshow menu, click view button. On the view menu, click slide show . Press F5 on the keyboard.
Slide Animation: Several animations for the slide objects are available through the drop- Down menus on the menu bar. Firs t select the text box or graphics That will be animated. Select slide show preset animation and choose From one of the option . to select a different animation or turn the Animation off, select the appropriate choice from the same menu. ? ? Select slide show custom animation from the menu bar. Select the object on the slide that will be animated from the Check to animated slide objects list. ? change ? ? ? Color after the animation effects Select the transition speed Select the transition sound Select an after animation effects if the text should
13
Adding transitions to a slide show: You can add customized transitions to your slide show that will make it Come alive and become appealing to your audience. Follow steps when Adding slide transitions. 1. In slide or slide sorter view, select the slide or slide you want to add a transition 2. on the slide show menu at top of the screen, click slide transition. 3. in the effect box, click the transition you want ,and then select any option you want. 4. to apply the transition to the slide, click apply. 5. to apply the transitions to all the slides, click to apply to all. 6. repeat process for each slide you want to add a transitions to. 7. to view the transitions, on the slide show menu, click animation preview.
Adding Clip Art: To add a clip art image a slide, follow these steps: ? select INSERT / PICTURE/ CLIP ART/ from the menu bar or click the picture button on the drawing toolbar.
14
? To find an image , click the white box following searching for clip and enter keywords describing the image you want to find.
Auto shapes; The auto shapes tool bar allows you to draw a number of geometrical Shapes, arrows, flowcharts elements, starts, and other graphics on a Slide. Activate the auto shapes tool bar by selecting INSERT/PICTURE AUTO SHAPES.
Word Art:
Add headlines in striking color and shapes to your presentation using
Word Art.
? Select insert/picture/word art from the menu bar or click the word art button on the Drawing toolbar. ? Choose a word art style from the listing and click OK.
15
Software used in the project
Power point is a very popular application among the people who gives presentation as part of their jobs, as well as for their support staff. with power point, you can Create visual adds that will help get the message across To an audience, what ever that message may be and whatever format it May be presented in. Power point is fairly, typical window based program in many ways. It contains the same basic element that you respect to see title bar, window controls and so on. And like all office 2003 applications, it has task pane that provides shortcuts for common activities. here’s a quick run Down of some basic element that are.
Tool bars:
The standard and formatting tool bars appears at the top and drawing tool bar at the button fault.
Task pane:
This pane pops up on its own for certain activities as well
16
As when power point starts. You can also display on hide it Manually from the view menu.
Slide pane:
This is where the power point slide that you are working on Appears. View button:
Near button left corner of the screen are some tiny icons switching back and forth between the various views.
Tabs:
In normal view, the left hand pane has two tabs: outline and slides. Each shows a different view of the list of slides in the presentation.
Design Templates:
A basic is also known as design templates do not provide sample content to the presentation only formatting. A design template typically provide of the fallowing.
• • •
Back ground graphics, usually consistent for all slides. Art for graphical bullet characters. Set of colors chosen to work well.
17
Presentation Templates:
There’s also another kind of template, known as presentation template. It is not only contains all The formatting elements of a design template, but it Also contains pre made slides with sample content. Creating a new presentation based on a template:
If we are starting presentation you have the following choice
• • •
Use the auto content wizard. Create a new presentation based on a design template Create a plain blank presentation
Digital animation:
Animation does not have a live origin it’s simulation of life. Simple animation appears cartoonist, but there are Animation applications. Digital animation is useful when Showing things that either don’t exit yet oravailable for Live filming.
18
METHODOLIGICAL PROCEDURE FOLLOWED IN THE PROJECT:
•
Click the start button and select program and then go to “ M S power point” and click it.
• • • • • • • • • •
Then a power point window will be opened. Click on format menu click on slide layout. A new slide will be displayed on the screen. We select slide layout which is suitable to our work and click it. That layout will be display that slide. To enter the text select the back ground option and select one from gradient. After the arrangements of back ground, select text and go to slid show option and select custom animation and add some effects to the text. For a new slide, select insert option & click new slide. After preparing all slides, we can view those slide with the help of view buttons. To see the show click slide show icon, if you want to change order of the slides click slide sorter view and arrange them.
19
•
After preparing all the slides we can select slide show option and click slide transition & arrange a design between two slides.
20
PRESENTATION OF THE TOPIC
21
22
23
24
25
26
CONCLUSION
My grateful thanks to our lecture in computer education for esteemed guidance and patience in directing us to prepare this project without his Affectionate suggestion and guidance it is Impossible to prepare this project. I express my deep thanks to our principal, who has given valuable suggestions and helped us by given the convenient Lab timings during preparation of the project. I am also thankful our librarian for help in issuing suitable Books and suggestions related to the project, at last Ian thankful to all of my group members and friends, who had shown their Valuable suggestions in preparing the project. At last I am very thankful to all my co-teachers took project On all are prepared 21 slides on the topic, we are utilized the lab hours without fail and complete the project work successfully Contribution is equal in preparation of project effectively by Design this project all are known about the computer education Project and also multimedia using in MS PowerPoint.
27
Computer Education Publications. Digit Magazine Magazine. Computer Applications Computer Education Fundamentals Complete Fundamentals
- New ERA
- Monthly
-
S.S Publications. Master Mind. Aptech. MC Graw Hill.
28
doc_458252994.doc
B.Ed., Computer Project
INDEX
S.No 1. . Particulars Page No:
INTRODUCTION OF THE PROJECT PROJECT STATEMENT
IMPORTANCE OF THE PROJECT INTRODUCTION TO MS – POWER POINT SOFTWARE USED IN THE PROJECT METHODOLIGICAL PROCEDURE FOLLOWED IN THE PROJECT PRESENTATION OF THE TOPIC CONCLUSION
2 3 4 16 19 20 25 26
2.
3. 4. 5.
6. 7. 8.
BIBLOGRAPHY
1
INTRODUCTION OF THE PROJECT PROJECT STATEMENT Before starting every project is planning is done. Planning project is a very important task and should be taken up with great care as the Efficiency of the Whole project largely depends up on its planning. While planning a project each And every detail should be worked out in anticipation and should consider carefully considering all the relevant Provisions in advance.
Now a day’s more stress being given to bring the teacher forward to open their own school and students after completing their course are Encouraged to open their own schools
Hence the study on the project planning has become more important. For this reason more universities and boards have intrudes the project work syllabus in the year. This chapter will help in planning the project for the student as well as to the teacher who want to start the new schools and facilities in formulating to correct approach to take up the job of project planning consists of the following important steps for project analysis of a particular project or established.
2
Importance of the project
To project will help the school organization in many ways. This project will help the administrators to save their time regarding little teaching. This project will help them, to refer to the to the particular information about topic at any time. The organization can decrease burdens on their hands. By the computerization of the teaching can be updated time to time.
There is no necessary to maintain written drawings on black board, with the help of this project we can get the information the particular student at any time. When we can compare each and every issue about this topic is preserved carefully in the computer. Even and unknown person can handle the system and use project.
In the school by the end of the year the old lesions have to be cleared. By using this project there we cleared the lesion within the seconds. There is the no necessary for the school to create a new lesion for the next year. With the help of the project we can only. These projects will allow us to add new slides and delete the slides and also to change the information of the student whenever necessary. The latest versions of software use a number of shared office resources like any other application.
3
Introduction to the project
As a part of project for me and my co- student teachers took “project on Power point”. We utilize the lab Successfully. hours without any fail and complete the project work
Before starting every project its planning is done. Planning project is a very Important task and should be taken up with great care as the efficiency of Whole project largely depends up on its planning. While planning a project Each and every details should be worked out in anticipation and should be consider carefully considering all the relevant provisions in advance. Now a day more stress being given to bring teacher forward to open their own schools and students after completing their courses are also being encourage to open their own schools. Hence the study of the project planning has became more important. For this reason most of the universities and boards have introduce the project work in the syllabus of the year. This chapter help in planning the project for the student as well as to the teachers who want to start new schools and facilities in formulating the approach to take up the job of project planning consists of the fallowing important steps. For project analysis of a particular project or establishment.
4
M S Power Point
Introduction:
A presentation is a form of communication , used to convey a concept, subject, plan or scheme information to an audience. It is need for formally Introduced a subject to an audience A presentation can use a combination Of voice, text, charts, video clips, and sound to communicate the selected Subject realistically. Depending on the length of time. Presentation are consider an ideal means of communication as they greatly enhance the structure of the subjects material to be conveyed to the audience. The act of the writing the subject material of the presentations are conducted by a presenter to divided the subject information into several pages presentations are conducted by a presenter and are made to an audience. The audience can range from one person to hall full of people. The presenter makes a
Presentation on a chosen subject. A presentation can either be entirely vocal, or some visual aids and subject note can assist the presenter. power point presentation graphics package which facilities the formulation of presentation.
the presenter commentary can also the added with textual slides. Charts pictures and voice to make effectively the audience. The slides Created thought a presentation graphics package are neat consistent and
5
Can be made extremely attractive that a power point 97 presentation is A collection of slides handout, speakers notes and in the presentation out Line al in one file. Advantages:
• • • •
In M S Power Point we can create different types of slides In M S Power Point we can add narration to the slide. In M S Power Point we can add video clips , pictures, text, etc. In M S Power Point important the slide from your hard disk are
FROM INTERNET. • • • • In M S Power Point we can add special effects to the slides. In M S Power Point we can insert Micro soft excel sheets. In M S Power Point we can insert Micro soft word tables. In M S Power Point we can convert colors slides into black and white SLIDES. Procedure of Developing a Power Point Presentation: WHAT IS AUTO CONTENT WIZARD: the auto content wizard will guides You to select from many new rebuilt content templates, and it provides Ideas , starter text, formatting, and organization for your presentation. The templates cover a wide verity of topics including status or team Meetings, certificates, calendars
6
of events, and even web home pages The wizard also gives tips on how to become a better presenter. Presentation based on a design templates: On the file menu click new , and then the presentation design tab. Scroll To see all design templates, click the one you want ,and then click ok. scroll To see all design layouts and then select a layout for your title slide. Type The title and any other content you want on t he title slide. On the common task tool bar, click new slide, and then select a layout for the next slide. Presentation Based on a Blank presentation : To create a blank presentation click on ht define menu, click new and Then click the General tab. Double click blank presentation, and then select a lay out for your first slide. The new presentation uses the color Scheme and title and styles of the default presentation. Type the title and Any other content you want on the title slide. When you finish, click save on the file menu name your presentation, and then click save, to see how your presentation will look, click slide show option from slide show menu. Starting Microsoft PowerPoint • TWO WAYS 1. Double click on the Microsoft PowerPoint icon on the Desktop.
7
2.
Click on start--> programs-- >Microsoft Office -> Microsoft PowerPoint
Opening an Existing presentation 1. select Open An Existing Presentation from the picture above 2. Click on your presentation in the white box below step 1 o if you do not see your presentation in the white box, Select More Files and hit OK.
8
o Locate you existing presentation and hit the Open button Create a Blank Presentation After you select Blank Presentation a window pops up asking You to select the layout of the first slide.
Navigating While In Your First Slide Show forward navigation • Simply click on the left mouse button or hit the enter button on your Key board.
Reverse navigation;
•
Hit the back space on the key board.
Exiting the show:
•
Hit the ESC button on the keyboard
9
Screen layout: The power point screen layout in Normal view. Views: Power point gives you four screen layouts for contacting your
presentation in addition to the slide show. You can select the page view by clicking the button just above the formatting toolbar and the bottom of the page. Normal view: This screen is split in to three sections showing the presentation outline on the left , the slide in the main window , and notes at the button.
Slide view: The slide view displays each slide on the screen and is helpful for Adding images, formatting text , and adding back ground styles. Slide sorter view: A small image of each slide displayed in slide sorter view. Slide can Easily be ordered and sorted from this screen.
10
Working with slides: New slide: This option is used to insert new slide in the current presentation. This Opting prompts you to click a slide layout. And then insert a new slide After the active slide. To do this on insert menu and then click new slide option. Duplicate slide: You can quickly duplicate object while you are working on a slide. or you Can make lots of duplicate s and use them to create arrays and sweeps. you Can also copy on object to another slide. Click the object you want to duplicate -ate. On Edit menu , click duplicate. to make additional duplicates. Delete slide: This option is used to delete the selected slide.to do this select the slide That you want to delete and then click on Edit menu. Then click delete Slide. Inserting Clipart & Pictures: 1. Display the slide you want to add a picture to. 2. click insert all the top of the screen 3. select picture 4. select clipart 5. click the category you want 6. click the picture you want 7. click insert clip on the short cut menu. 8. when you are finished using the clip gallery, click the close button on the clip gallery title bar 9. step 1-4 are very similar when inserting other pictures, objects ,movies, sounds, and charts.
11
Color schemes:
• • •
select the format slide color scheme from the menu bar. Click one of the present color scheme thumbnail images in the color Click the preview button to see hoe the scheme will appear on the slide. To make a changes to the color scheme , click the custom tab on the dialog box. Change the color of the slide elements by selecting the color button. Highlight on of the color from the text and line color choice and click ok when finished.
•
• •
Back ground:
Follow these steps to add background Color and patterns to a slide
• •
Select format background from the menu bar. Select color from the drop – down below the back ground fill preview or choose more colors…. For a large selection. Select fill effects from the drop-down menu to add gradistes, texture , patterns, or a to the back ground.
•
12
Viewing the slide show:
You can view your slide show by any of the following ways: • • • • Click slide show at the lower left of the power point window. On the slideshow menu, click view button. On the view menu, click slide show . Press F5 on the keyboard.
Slide Animation: Several animations for the slide objects are available through the drop- Down menus on the menu bar. Firs t select the text box or graphics That will be animated. Select slide show preset animation and choose From one of the option . to select a different animation or turn the Animation off, select the appropriate choice from the same menu. ? ? Select slide show custom animation from the menu bar. Select the object on the slide that will be animated from the Check to animated slide objects list. ? change ? ? ? Color after the animation effects Select the transition speed Select the transition sound Select an after animation effects if the text should
13
Adding transitions to a slide show: You can add customized transitions to your slide show that will make it Come alive and become appealing to your audience. Follow steps when Adding slide transitions. 1. In slide or slide sorter view, select the slide or slide you want to add a transition 2. on the slide show menu at top of the screen, click slide transition. 3. in the effect box, click the transition you want ,and then select any option you want. 4. to apply the transition to the slide, click apply. 5. to apply the transitions to all the slides, click to apply to all. 6. repeat process for each slide you want to add a transitions to. 7. to view the transitions, on the slide show menu, click animation preview.
Adding Clip Art: To add a clip art image a slide, follow these steps: ? select INSERT / PICTURE/ CLIP ART/ from the menu bar or click the picture button on the drawing toolbar.
14
? To find an image , click the white box following searching for clip and enter keywords describing the image you want to find.
Auto shapes; The auto shapes tool bar allows you to draw a number of geometrical Shapes, arrows, flowcharts elements, starts, and other graphics on a Slide. Activate the auto shapes tool bar by selecting INSERT/PICTURE AUTO SHAPES.
Word Art:
Add headlines in striking color and shapes to your presentation using
Word Art.
? Select insert/picture/word art from the menu bar or click the word art button on the Drawing toolbar. ? Choose a word art style from the listing and click OK.
15
Software used in the project
Power point is a very popular application among the people who gives presentation as part of their jobs, as well as for their support staff. with power point, you can Create visual adds that will help get the message across To an audience, what ever that message may be and whatever format it May be presented in. Power point is fairly, typical window based program in many ways. It contains the same basic element that you respect to see title bar, window controls and so on. And like all office 2003 applications, it has task pane that provides shortcuts for common activities. here’s a quick run Down of some basic element that are.
Tool bars:
The standard and formatting tool bars appears at the top and drawing tool bar at the button fault.
Task pane:
This pane pops up on its own for certain activities as well
16
As when power point starts. You can also display on hide it Manually from the view menu.
Slide pane:
This is where the power point slide that you are working on Appears. View button:
Near button left corner of the screen are some tiny icons switching back and forth between the various views.
Tabs:
In normal view, the left hand pane has two tabs: outline and slides. Each shows a different view of the list of slides in the presentation.
Design Templates:
A basic is also known as design templates do not provide sample content to the presentation only formatting. A design template typically provide of the fallowing.
• • •
Back ground graphics, usually consistent for all slides. Art for graphical bullet characters. Set of colors chosen to work well.
17
Presentation Templates:
There’s also another kind of template, known as presentation template. It is not only contains all The formatting elements of a design template, but it Also contains pre made slides with sample content. Creating a new presentation based on a template:
If we are starting presentation you have the following choice
• • •
Use the auto content wizard. Create a new presentation based on a design template Create a plain blank presentation
Digital animation:
Animation does not have a live origin it’s simulation of life. Simple animation appears cartoonist, but there are Animation applications. Digital animation is useful when Showing things that either don’t exit yet oravailable for Live filming.
18
METHODOLIGICAL PROCEDURE FOLLOWED IN THE PROJECT:
•
Click the start button and select program and then go to “ M S power point” and click it.
• • • • • • • • • •
Then a power point window will be opened. Click on format menu click on slide layout. A new slide will be displayed on the screen. We select slide layout which is suitable to our work and click it. That layout will be display that slide. To enter the text select the back ground option and select one from gradient. After the arrangements of back ground, select text and go to slid show option and select custom animation and add some effects to the text. For a new slide, select insert option & click new slide. After preparing all slides, we can view those slide with the help of view buttons. To see the show click slide show icon, if you want to change order of the slides click slide sorter view and arrange them.
19
•
After preparing all the slides we can select slide show option and click slide transition & arrange a design between two slides.
20
PRESENTATION OF THE TOPIC
21
22
23
24
25
26
CONCLUSION
My grateful thanks to our lecture in computer education for esteemed guidance and patience in directing us to prepare this project without his Affectionate suggestion and guidance it is Impossible to prepare this project. I express my deep thanks to our principal, who has given valuable suggestions and helped us by given the convenient Lab timings during preparation of the project. I am also thankful our librarian for help in issuing suitable Books and suggestions related to the project, at last Ian thankful to all of my group members and friends, who had shown their Valuable suggestions in preparing the project. At last I am very thankful to all my co-teachers took project On all are prepared 21 slides on the topic, we are utilized the lab hours without fail and complete the project work successfully Contribution is equal in preparation of project effectively by Design this project all are known about the computer education Project and also multimedia using in MS PowerPoint.
27
Computer Education Publications. Digit Magazine Magazine. Computer Applications Computer Education Fundamentals Complete Fundamentals
- New ERA
- Monthly
-
S.S Publications. Master Mind. Aptech. MC Graw Hill.
28
doc_458252994.doc