Mobile Phone Secrets & Tricks
.:: NOKIA ::.
Nokia Universal Codes
Code Description :
These Nokia codes will work on most Nokia Mobile
Phones
(1) *3370# Activate Enhanced Full Rate Codec (EFR)
- Your phone uses the best sound quality but talk time
is reduced my approx. 5%
(2) #3370# Deactivate Enhanced Full Rate Codec
(EFR) OR *3370# ( Favourite )
(3) *#4720# Activate Half Rate Codec - Your phone
uses a lower quality sound but you should gain
approx 30% more Talk Time.
(4) *#4720# Deactivate Half Rate Codec.
(5) *#0000# Displays your phones software version,
1st Line : Software Version, 2nd Line : Software
Release Date, 3rd Line : Compression Type. (
Favourite )
(6) *#9999# Phones software version if *#0000#
does not work.
(7) *#06# For checking the International Mobile
Equipment Identity (IMEI Number). ( Favourite )
(8) #pw+1234567890+1# Provider Lock Status. (use
the "*" button to obtain the "p,w"
and "+" symbols).
(9) #pw+1234567890+2# Network Lock Status. (use
the "*" button to obtain the "p,w"
and "+" symbols).
(10) #pw+1234567890+3# Country Lock Status. (use the
"*" button to obtain the "p,w"
and "+" symbols).
(11) #pw+1234567890+4# SIM Card Lock Status. (use
the "*" button to obtain the "p,w"
and "+" symbols).
(12) *#147# (vodafone) this lets you know who called
you last.
(13) *#1471# Last call (Only vodofone).
(14) *#21# Allows you to check the number that "All
Calls" are diverted to
(15) *#2640# Displays security code in use.
(16) *#30# Lets you see the private number.
(17) *#43# Allows you to check the "Call Waiting"
status of your phone.
(18) *#61# Allows you to check the number that "On
No Reply" calls are diverted to.
(19) *#62# Allows you to check the number that
"Divert If Unreachable (no service)" calls
are diverted to.
(20) *#67# Allows you to check the number that "On
Busy Calls" are diverted to.
(21) *#67705646# Removes operator logo on 3310 &
3330.
(22) *#73# Reset phone timers and game scores.
(23) *#746025625# Displays the SIM Clock status, if
your phone supports this power saving feature
"SIM Clock Stop Allowed", it means you will get the
best standby time possible.
(24) *#7760# Manufactures code.
(25) *#7780# Restore factory settings.
(26) *#8110# Software version for the nokia 8110.
(27) *#92702689# Displays - 1.Serial Number, 2.Date
Made, 3.Purchase Date, 4.Date of last repair
(0000 for no repairs), 5.Transfer User Data. To exit
this mode you need to switch your phone off
then on again. ( Favourite )
(28) *#94870345123456789# Deactivate the PWM-Mem.
(29) **21*number# Turn on "All Calls" diverting to
the phone number entered.
(30) **61*number# Turn on "No Reply" diverting to
the phone number entered.
(31) **67*number# Turn on "On Busy" diverting to the
phone number entered.
(32) 12345 This is the default security code.
press and hold # Lets you switch between
lines
NOKIA 5110/5120/5130/5190
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
Provider lock status: #pw+1234567890+1
Network lock status #pw+1234567890+2
Provider lock status: #pw+1234567890+3
SimCard lock status: #pw+1234567890+4
NOKIA 6110/6120/6130/6150/6190
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
NOKIA 3110
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 # or * # 9 9 9 9 # or *
# 3 1 1 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
NOKIA 3330
*#06#
This will show your warranty details *#92702689#
*3370#
Basically increases the quality of calling sound, but
decreases battery length.
#3370#
Deactivates the above
*#0000#
Shows your software version
*#746025625#This shows if your phone will allow sim
clock stoppage
*4370#
Half Rate Codec activation. It will automatically
restart
#4370#
Half Rate Codec deactivation. It will automatically
restart
Restore Factory Settings
To do this simply use this code *#7780#
Manufacturer Info
Date of Manufacturing *#3283#
*3001#12345# (TDMA phones only)
This will put your phone into programming mode, and
you'll be presented with the programming menu.
2) Select "NAM1"
3) Select "PSID/RSID"
4) Select "P/RSID 1"
Note: Any of the P/RSIDs will work
5) Select "System Type" and set it to Private
6) Select "PSID/RSID" and set it to 1
7) Select "Connected System ID"
Note: Enter your System ID for Cantel, which is 16401
or 16423. If you don't know yours,
ask your local dealer for it.
8) Select "Alpha Tag"
9) Enter a new tag, then press OK
10) Select "Operator Code (SOC)" and set it to 2050
11) Select "Country Code" and set it to 302 for
Canada, and 310 for the US.
12) Power down the phone and power it back on again
ISDN Code
To check the ISDN number on your Nokia use this code
*#92772689#
.:: Ericsson ::.
Ericson T65
*#05# Fake Insert puk screen Press no to exit
Ericsson T20
Ericsson T20
MENU tecnichal Info
[type] >*<<*<*
Displays :
1] Info service
1] Info SW
2] Info hardware
3] SIMlock
4]setup
2] Service setup
1] Contrast
3]Service Test
1] Display
2]Leds
3]Keyboard
4] ringer
5] Vibration
6]Headset
7] Microphone
8]Clock
4] Names List
MENU info
[Type] >*<<**<
Network and Subnetwork : NCK and NSCK
Ericsson T28
>*<<*<* menu Tecnichal info
SW vers. and name list
>*<<**< menu Personal Info
Network and Subnetwork : NCK and NSCK
< and > are the right and left menu's keys
Ericsson T18s/T10/A1018s
>*<<*<* software
CXC125065 Internal product code
PRG
970715 1515 Software version and SW rev.
<* CLR <><**
< and > are the right and left menu's keys
!!!><**
Control /Enable SIM Lock!!!
Ericsson R310
Technical Info : >*<<*<*
Options :
1) service Info
info Software
Simlock
Configuration
2) Service Test
Display
Led/Illumination
Keyboard
ringer
Vibration
Headset
Microphone
Clock
3)Text's name List
Info personal : >*<<**<
SIM Locking ( 8 digits' code ) ( it could harm your
phone )
1) Network
2) Subnetwork
3) SP
4) Corporate
.:: Siemens ::.
Siemens C25
IMEI number: * # 0 6 #
Software version: put off sim card and enter: : * # 0
6 # and press LONG KEY
Bonus screen: in phone booke: + 1 2 0 2 2 2 4 3 1 2 1
.:: Bosch ::.
IMEI Number: * # 0 6 #
Dafault Language: * # 0 0 0 0 #
Net Monitor: * # 3 2 6 2 2 5 5 * 8 3 7 8 #
.::Alcatel ::.
IMEI number: * # 0 6 #
Software version: * # 0 6 #
Net Monitor: 0 0 0 0 0 0 *
.:: Samsung ::.
Samsung SGH600/2100DB
IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 # albo * # 0 8 3 7 #
Net Monitor: * # 0 3 2 4 #
Chaning LCD contrast: * # 0 5 2 3 #
Memory info: * # 0 3 7 7 # albo * # 0 2 4 6 #
Reset pamieci (SIMLOCK`a removing!!!): *2767*3855#
Reset pamieci CUSTOM: *2767*2878#
Battery state: * # 9 9 9 8 * 2 2 8 #
Alarm beeper: *#9998*289#
Vibra test: *#9998*842#
.:: Dancall ::.
IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 #
.:: Philips ::.
*#3333*# Displays the blocking list.
*#7489*# Displays the security code.
*#06# Displays the IMEI number.
*#8377*# Displays the SW info.
.:: Panasonic ::.
Panasonic gd90 gd93
*#9999# SW - Type the code on switch on , during
network seek
-Vers. SW and production code
Enable ringing and vibration contemporarily
Enable vibration with # then increase volume with
"tone menu "
Panasonic gd70
*#9999# SW - Type the code on switch on , during
network seek
-Vers. SW and production code
Enable ringing and vibration contemporarily
Enable vibration with # then increase volume with
"tone menu "
.:: Acer ::.
Acer V 750
*#400# Display Adc/ Set Cal-Value -
*#402# Set LCD Contrast
*#403# Display Errors Info
*#300# Display Info Hw & Sw
*#301# Menu Test
*#302# Menu Acoustics
*#303# (Settings saved) Set English language?
*#307# Menu Engineering
*#311# Reset Phone Code - [ Also reset Security Codes
! ]
*#330# (Execute not success) [ unknown ]
*#331# (Service deactivated) [ unknown ]
*#332# (Service unavailable)[ unknown ]
*#333# (Execute not success)[ unknown ]
*#351# (Service unavailable) [ unknown ]
*#360# (Invalid input)[ unknown ]
*#361# (Invalid input) [ unknown ]
*#362# (Invalid input) [ unknown ]
*#363# (Invalid input) [ unknown ]
.:: Genie ::.
Genie DB
*#06# IMEI.
*#2254*# Near Cell Mode.
For every received BTS will be displayed :
Current channel and 2 channel levels
*#06# IMEI
*#2558# time of network connection ( D/H/M )
*#2562# Fores reconnection to network
!!!*#7489# Dispalys and modify phones' security
code!!!
!!!*#3377# SIM lock information !!!
*#7378# SIM card Informations : supported phase name
and tipe
*#7693# Enable/disable "Sleep Mode"
*#8463# State of "Sleep Mode"
*#2255# Debug Call Mode enable/disable
*#3333*# Displays the blocking list.
*#7489*# Displays the security code
*#06# Displays the IMEI number
*#8377*# Displays the SW info.
.:: NEC ::.
NEC db2000
*#2820# software vers.
IMEI *#06#
Reset *73738# (send?)
SP Lock info:
* # 3210 # (send?)
Network barring info : *#8140# (send?)
( it could harm your phone )
SIM lock it could harm your phone )
*#4960 # (send?) -Inquiry * 4960 * password * password
# (send?) lock
#4960* password # (send?) unlock
[password] [8 digits]
Net Lock
*#7320# (send?) -Inquiry * 7320 * password * password
# (send?) lock
#7320* password # (send?) unlock
[password] [ 8 digits]
Net Lock 2:
*#2220# (invio) - Inquiry * 2220 * password * password
# (send?) lock
#2220* password # (invio?)unlock
[password] [8 digits]
Unlock subnetwork
*#1110# (send?) - inquiry * 1110 * password * password
# (send?) lock
#1110* password # (send?) unlock
[password] [n� 8 cifre]
( it could harm your phone )
.:: Trium ::.
Trium Geo/Geo @ - Astral - Cosmo -Aria
Enter the menu and type *
A new menu will be displayed :
Application : SW version and battery's voltage
Trium Galaxy
Push * and type 5806: Production date and SW version
.:: Telit ::.
Telit GM 810
MONITOR - technical menu - : type ++++ and push OK.
Adiacent cells list : # and *
Now if you push OK the phone displays battery ' s
voltage and temperature
.:: Sagem ::.
Sagem MC959/940
Select commands' menu and push *
Displays a new menu' :
Appli : software vers. and battery's voltage
Eprom
Sim Lock
Test LCD: display test , green/red and vibration
Sagem MC920
Select commands' menu and push *
Displays 5 new menus :
1 APPLI
VERSION ( SW)
BATTERY (voltage )
2 PROM (IMEI)
3!!! SIM LOCK (10 digits code requested ) !!!
4- NETWORK (returns : OPTION NOT AVAILABLE)
5- TEST LCD
SYMBOL 1 (LCD)
SYMBOL 2 (test2 LCD)
BLACK (all icons and carachters displayed )
FOR PHOTO (welcome message and time )
VIBRATOR (vibration test )
.:: Sony ::.
Sony CMD Z5/J5
Vers. SW :
Without SIM , switch on phone and type l *#7353273#
.:: Eprom ::.
!!! Sim Lock [10 digits code ] ( it could harm your
phone )
NETWORK : OPTION NOT AVAILABLE
Test LCD: display test of the green/red leds and
vibration
Push * and type 4329 :enables/disables network monitor
1 (the same of MT35)
Push * and type 621342 :enables/disables network
monitor 2
Push * and type 5807 : Serial Number Software Vers.
Push * and type 936505: IMEI -- Software Vers.
TPush * and type 547 : Test serial Data Cable DISPLAYS
:"Testmode"
Push * and type 362628: ISMI BLOCK (UNKNOWN)
Push * and type 476989: NS BLOCK (UNKNOWN)
Push * and type 482896:CP BLOCK (UNKNOWN)
Push * and type 787090: ? BLOCK (UNKNOWN)
Push * and type 787292 : block current network
!!! Push * and type 967678: SP LOCK!!!
Push * and type 850696:Warm Start ( ENABLE/DISABLE)
Push * and type 3926 : Swicth off phone
Push * and type 5806: Production date and SW version
.:: Motorola ::.
Motorola V3688
IMEI *#06#
Enhanced Full Rate Codec EFR
Enable EFR : [][][] 119 [] 1 [] OK.
disable EFR : [][][] 119 [] 0 [] OK
.:: Tips and Tricks ::.
Send an E-mail from your GSM
From your telephone you can send an email to whichever
E-mail customer of the Internet network.
The e-mail will be sent to the maximum of within an
hour from the reception.
The sended message will contain in luminosity the
telephone number of the sender.
In order for sending e-mail, send an SMS with this
syntax (always separated by spaces):
EMA name@domain text-of-your-email
Example: in order to send an email to john@..., do the
following:
EMA john@... text-of-your-email
if your phone cant print @ replace it with a !
EMA johon!doe.com text-of-your-email
And then send this message to the folloving number:
+39 338 8641732
Free SMS Center numbers
From your telephone you can send SMS messages of 160
char. max. to another GSM phone
Your message will be sent through an SMS Center
(usually the one that gave your provider)
You pay a little fee depending of your provider, BUT
YOU WILL HAVE TO PAY something
In order for sending SMS without paying anything, you
got to change your SMS Center number with these one
+491722270300 or +358405202999 or +352021100003
Codes (that they dont tell you in the manual)
To check the IMEI (International Mobile Equipment
Identity) type: *#06#
Information you get from the IMEI:
XXXXXX XX XXXXXX X
TAC FAC SNR SP
TAC = Type Approval Code (first 2 digits = country
code).
FAC = Final Assembly Code (For Nokia phonfiltered=10).
SNR = Serial Number.
SP = Spare (always SP=0).
To check the phone's software (firmware revision
information) type: *#0000# ( or for some phones outher
then Nokia 61XX you can try *#model nummber# ex. for
8110 *#8110#)
Information you can get from the phone's software
version:
V 3.14
28-11-97
NSE-3
1st line: Software version.
2nd line: The date of the software release.
3nd line: Phone type, .
Some versions and dates:
V 3.14 28/11/97
V4.33 11/03/98
V 4.73 22/04/98
V 5.24 14/9/98
Pin-Out Diagram for the 6110
1 - VIN CHARGER INPUT VOLTAGE 8.4V 0.8A
2 - CHRG CTRL CHARGER CONTROL PWM 32Khz
3 - XMIC MIC INPUT 60mV - 1V
4 - SGND SIGNAL GROUND
5 - XEAR EAR OUTPUT 80mV - 1V
6 - MBUS 9600 B/S
7 - FBUS_RX 9.6 - 230.4 KB/S
8 - FBUS_TX 9.6 - 230.4 KB/S
9 - L_GND CHARGER / LOGIC GND
Revealing Headphone and Car-Kit Menus
Think about this: If you do these tricks the new menus
can not be erased after the procedure. But it's not
dangerous or harmful for your phone
To enable the headset-function, you have to
short-circuit the "3" and "4". After a short time
there is "Headset" on the display Now, menu 3-6 is now
enabled!
To enable the carkit-function you have to
short-circuit the "4" and "5". After a short time,
"Car" is shown on the display and the menu 3-7 is
enabled!!
This Trick is for you how want to hear more then your
supposed to !
If you short-circuit the left and the right contact
with the middle contact ("3", "6" and "9") the Nokia
Software hangs! The profile "Headset" will be
activated. Before you do this, just active the "auto
call receive" function in the headphone profile and
set the ringing volume to "mute" Now you can use your
phone for checking out what people are talking about
in a room. Place the phone somewhere stratidic and
call your phone! The phone receives the call without
ringing and you can listen to what people are talking
about! .....gr8...
Serial numbers on your 6110
For more info type: *#92702689#
The first screen gives you the serial and IMEI number.
Then there is the Date of Manufacture: ex. Made 1297
Then there is the Purchasing Date: ex. Purchasing Date
0298
Then there is the last Repair Date: ex. Repaired: 0000
Note: you must turn off the phone to exit after this
test, because of the last function, "transfer user
data" which doesn't work as "standard"....You can use
this mode only to transfer all Calender, Profile and
Callers Group Information to another phone (eg. if you
are replacing phone or configuring phones for use
within your company or when a particular phone doesn't
works correctly )
Activating and deactivating EFR and HFR, on your 6110
*3370# to activate Enhanced Full Rate - Makes calls
sound better, but decreases the battery life by about
5%.
#3370# to deactivate Enhanced Full Rate
*4720# to activate Half Rate Mode - Drops call
quality, but increases battery life by about 30%.
#4720# to deactivate Half Rate Mode....
.:: NOKIA ::.
Nokia Universal Codes
Code Description :
These Nokia codes will work on most Nokia Mobile
Phones
(1) *3370# Activate Enhanced Full Rate Codec (EFR)
- Your phone uses the best sound quality but talk time
is reduced my approx. 5%
(2) #3370# Deactivate Enhanced Full Rate Codec
(EFR) OR *3370# ( Favourite )
(3) *#4720# Activate Half Rate Codec - Your phone
uses a lower quality sound but you should gain
approx 30% more Talk Time.
(4) *#4720# Deactivate Half Rate Codec.
(5) *#0000# Displays your phones software version,
1st Line : Software Version, 2nd Line : Software
Release Date, 3rd Line : Compression Type. (
Favourite )
(6) *#9999# Phones software version if *#0000#
does not work.
(7) *#06# For checking the International Mobile
Equipment Identity (IMEI Number). ( Favourite )
(8) #pw+1234567890+1# Provider Lock Status. (use
the "*" button to obtain the "p,w"
and "+" symbols).
(9) #pw+1234567890+2# Network Lock Status. (use
the "*" button to obtain the "p,w"
and "+" symbols).
(10) #pw+1234567890+3# Country Lock Status. (use the
"*" button to obtain the "p,w"
and "+" symbols).
(11) #pw+1234567890+4# SIM Card Lock Status. (use
the "*" button to obtain the "p,w"
and "+" symbols).
(12) *#147# (vodafone) this lets you know who called
you last.
(13) *#1471# Last call (Only vodofone).
(14) *#21# Allows you to check the number that "All
Calls" are diverted to
(15) *#2640# Displays security code in use.
(16) *#30# Lets you see the private number.
(17) *#43# Allows you to check the "Call Waiting"
status of your phone.
(18) *#61# Allows you to check the number that "On
No Reply" calls are diverted to.
(19) *#62# Allows you to check the number that
"Divert If Unreachable (no service)" calls
are diverted to.
(20) *#67# Allows you to check the number that "On
Busy Calls" are diverted to.
(21) *#67705646# Removes operator logo on 3310 &
3330.
(22) *#73# Reset phone timers and game scores.
(23) *#746025625# Displays the SIM Clock status, if
your phone supports this power saving feature
"SIM Clock Stop Allowed", it means you will get the
best standby time possible.
(24) *#7760# Manufactures code.
(25) *#7780# Restore factory settings.
(26) *#8110# Software version for the nokia 8110.
(27) *#92702689# Displays - 1.Serial Number, 2.Date
Made, 3.Purchase Date, 4.Date of last repair
(0000 for no repairs), 5.Transfer User Data. To exit
this mode you need to switch your phone off
then on again. ( Favourite )
(28) *#94870345123456789# Deactivate the PWM-Mem.
(29) **21*number# Turn on "All Calls" diverting to
the phone number entered.
(30) **61*number# Turn on "No Reply" diverting to
the phone number entered.
(31) **67*number# Turn on "On Busy" diverting to the
phone number entered.
(32) 12345 This is the default security code.
press and hold # Lets you switch between
lines
NOKIA 5110/5120/5130/5190
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
Provider lock status: #pw+1234567890+1
Network lock status #pw+1234567890+2
Provider lock status: #pw+1234567890+3
SimCard lock status: #pw+1234567890+4
NOKIA 6110/6120/6130/6150/6190
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
Enhanced Full Rate: * 3 3 7 0 # [ # 3 3 7 0 # off]
Half Rate: * 4 7 2 0 #
NOKIA 3110
IMEI number: * # 0 6 #
Software version: * # 0 0 0 0 # or * # 9 9 9 9 # or *
# 3 1 1 0 #
Simlock info: * # 9 2 7 0 2 6 8 9 #
NOKIA 3330
*#06#
This will show your warranty details *#92702689#
*3370#
Basically increases the quality of calling sound, but
decreases battery length.
#3370#
Deactivates the above
*#0000#
Shows your software version
*#746025625#This shows if your phone will allow sim
clock stoppage
*4370#
Half Rate Codec activation. It will automatically
restart
#4370#
Half Rate Codec deactivation. It will automatically
restart
Restore Factory Settings
To do this simply use this code *#7780#
Manufacturer Info
Date of Manufacturing *#3283#
*3001#12345# (TDMA phones only)
This will put your phone into programming mode, and
you'll be presented with the programming menu.
2) Select "NAM1"
3) Select "PSID/RSID"
4) Select "P/RSID 1"
Note: Any of the P/RSIDs will work
5) Select "System Type" and set it to Private
6) Select "PSID/RSID" and set it to 1
7) Select "Connected System ID"
Note: Enter your System ID for Cantel, which is 16401
or 16423. If you don't know yours,
ask your local dealer for it.
8) Select "Alpha Tag"
9) Enter a new tag, then press OK
10) Select "Operator Code (SOC)" and set it to 2050
11) Select "Country Code" and set it to 302 for
Canada, and 310 for the US.
12) Power down the phone and power it back on again
ISDN Code
To check the ISDN number on your Nokia use this code
*#92772689#
.:: Ericsson ::.
Ericson T65
*#05# Fake Insert puk screen Press no to exit
Ericsson T20
Ericsson T20
MENU tecnichal Info
[type] >*<<*<*
Displays :
1] Info service
1] Info SW
2] Info hardware
3] SIMlock
4]setup
2] Service setup
1] Contrast
3]Service Test
1] Display
2]Leds
3]Keyboard
4] ringer
5] Vibration
6]Headset
7] Microphone
8]Clock
4] Names List
MENU info
[Type] >*<<**<
Network and Subnetwork : NCK and NSCK
Ericsson T28
>*<<*<* menu Tecnichal info
SW vers. and name list
>*<<**< menu Personal Info
Network and Subnetwork : NCK and NSCK
< and > are the right and left menu's keys
Ericsson T18s/T10/A1018s
>*<<*<* software
CXC125065 Internal product code
PRG
970715 1515 Software version and SW rev.
<* CLR <><**
< and > are the right and left menu's keys
!!!><**
Control /Enable SIM Lock!!!
Ericsson R310
Technical Info : >*<<*<*
Options :
1) service Info
info Software
Simlock
Configuration
2) Service Test
Display
Led/Illumination
Keyboard
ringer
Vibration
Headset
Microphone
Clock
3)Text's name List
Info personal : >*<<**<
SIM Locking ( 8 digits' code ) ( it could harm your
phone )
1) Network
2) Subnetwork
3) SP
4) Corporate
.:: Siemens ::.
Siemens C25
IMEI number: * # 0 6 #
Software version: put off sim card and enter: : * # 0
6 # and press LONG KEY
Bonus screen: in phone booke: + 1 2 0 2 2 2 4 3 1 2 1
.:: Bosch ::.
IMEI Number: * # 0 6 #
Dafault Language: * # 0 0 0 0 #
Net Monitor: * # 3 2 6 2 2 5 5 * 8 3 7 8 #
.::Alcatel ::.
IMEI number: * # 0 6 #
Software version: * # 0 6 #
Net Monitor: 0 0 0 0 0 0 *
.:: Samsung ::.
Samsung SGH600/2100DB
IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 # albo * # 0 8 3 7 #
Net Monitor: * # 0 3 2 4 #
Chaning LCD contrast: * # 0 5 2 3 #
Memory info: * # 0 3 7 7 # albo * # 0 2 4 6 #
Reset pamieci (SIMLOCK`a removing!!!): *2767*3855#
Reset pamieci CUSTOM: *2767*2878#
Battery state: * # 9 9 9 8 * 2 2 8 #
Alarm beeper: *#9998*289#
Vibra test: *#9998*842#
.:: Dancall ::.
IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 #
.:: Philips ::.
*#3333*# Displays the blocking list.
*#7489*# Displays the security code.
*#06# Displays the IMEI number.
*#8377*# Displays the SW info.
.:: Panasonic ::.
Panasonic gd90 gd93
*#9999# SW - Type the code on switch on , during
network seek
-Vers. SW and production code
Enable ringing and vibration contemporarily
Enable vibration with # then increase volume with
"tone menu "
Panasonic gd70
*#9999# SW - Type the code on switch on , during
network seek
-Vers. SW and production code
Enable ringing and vibration contemporarily
Enable vibration with # then increase volume with
"tone menu "
.:: Acer ::.
Acer V 750
*#400# Display Adc/ Set Cal-Value -
*#402# Set LCD Contrast
*#403# Display Errors Info
*#300# Display Info Hw & Sw
*#301# Menu Test
*#302# Menu Acoustics
*#303# (Settings saved) Set English language?
*#307# Menu Engineering
*#311# Reset Phone Code - [ Also reset Security Codes
! ]
*#330# (Execute not success) [ unknown ]
*#331# (Service deactivated) [ unknown ]
*#332# (Service unavailable)[ unknown ]
*#333# (Execute not success)[ unknown ]
*#351# (Service unavailable) [ unknown ]
*#360# (Invalid input)[ unknown ]
*#361# (Invalid input) [ unknown ]
*#362# (Invalid input) [ unknown ]
*#363# (Invalid input) [ unknown ]
.:: Genie ::.
Genie DB
*#06# IMEI.
*#2254*# Near Cell Mode.
For every received BTS will be displayed :
Current channel and 2 channel levels
*#06# IMEI
*#2558# time of network connection ( D/H/M )
*#2562# Fores reconnection to network
!!!*#7489# Dispalys and modify phones' security
code!!!
!!!*#3377# SIM lock information !!!
*#7378# SIM card Informations : supported phase name
and tipe
*#7693# Enable/disable "Sleep Mode"
*#8463# State of "Sleep Mode"
*#2255# Debug Call Mode enable/disable
*#3333*# Displays the blocking list.
*#7489*# Displays the security code
*#06# Displays the IMEI number
*#8377*# Displays the SW info.
.:: NEC ::.
NEC db2000
*#2820# software vers.
IMEI *#06#
Reset *73738# (send?)
SP Lock info:
* # 3210 # (send?)
Network barring info : *#8140# (send?)
( it could harm your phone )
SIM lock it could harm your phone )
*#4960 # (send?) -Inquiry * 4960 * password * password
# (send?) lock
#4960* password # (send?) unlock
[password] [8 digits]
Net Lock
*#7320# (send?) -Inquiry * 7320 * password * password
# (send?) lock
#7320* password # (send?) unlock
[password] [ 8 digits]
Net Lock 2:
*#2220# (invio) - Inquiry * 2220 * password * password
# (send?) lock
#2220* password # (invio?)unlock
[password] [8 digits]
Unlock subnetwork
*#1110# (send?) - inquiry * 1110 * password * password
# (send?) lock
#1110* password # (send?) unlock
[password] [n� 8 cifre]
( it could harm your phone )
.:: Trium ::.
Trium Geo/Geo @ - Astral - Cosmo -Aria
Enter the menu and type *
A new menu will be displayed :
Application : SW version and battery's voltage
Trium Galaxy
Push * and type 5806: Production date and SW version
.:: Telit ::.
Telit GM 810
MONITOR - technical menu - : type ++++ and push OK.
Adiacent cells list : # and *
Now if you push OK the phone displays battery ' s
voltage and temperature
.:: Sagem ::.
Sagem MC959/940
Select commands' menu and push *
Displays a new menu' :
Appli : software vers. and battery's voltage
Eprom
Sim Lock
Test LCD: display test , green/red and vibration
Sagem MC920
Select commands' menu and push *
Displays 5 new menus :
1 APPLI
VERSION ( SW)
BATTERY (voltage )
2 PROM (IMEI)
3!!! SIM LOCK (10 digits code requested ) !!!
4- NETWORK (returns : OPTION NOT AVAILABLE)
5- TEST LCD
SYMBOL 1 (LCD)
SYMBOL 2 (test2 LCD)
BLACK (all icons and carachters displayed )
FOR PHOTO (welcome message and time )
VIBRATOR (vibration test )
.:: Sony ::.
Sony CMD Z5/J5
Vers. SW :
Without SIM , switch on phone and type l *#7353273#
.:: Eprom ::.
!!! Sim Lock [10 digits code ] ( it could harm your
phone )
NETWORK : OPTION NOT AVAILABLE
Test LCD: display test of the green/red leds and
vibration
Push * and type 4329 :enables/disables network monitor
1 (the same of MT35)
Push * and type 621342 :enables/disables network
monitor 2
Push * and type 5807 : Serial Number Software Vers.
Push * and type 936505: IMEI -- Software Vers.
TPush * and type 547 : Test serial Data Cable DISPLAYS
:"Testmode"
Push * and type 362628: ISMI BLOCK (UNKNOWN)
Push * and type 476989: NS BLOCK (UNKNOWN)
Push * and type 482896:CP BLOCK (UNKNOWN)
Push * and type 787090: ? BLOCK (UNKNOWN)
Push * and type 787292 : block current network
!!! Push * and type 967678: SP LOCK!!!
Push * and type 850696:Warm Start ( ENABLE/DISABLE)
Push * and type 3926 : Swicth off phone
Push * and type 5806: Production date and SW version
.:: Motorola ::.
Motorola V3688
IMEI *#06#
Enhanced Full Rate Codec EFR
Enable EFR : [][][] 119 [] 1 [] OK.
disable EFR : [][][] 119 [] 0 [] OK
.:: Tips and Tricks ::.
Send an E-mail from your GSM
From your telephone you can send an email to whichever
E-mail customer of the Internet network.
The e-mail will be sent to the maximum of within an
hour from the reception.
The sended message will contain in luminosity the
telephone number of the sender.
In order for sending e-mail, send an SMS with this
syntax (always separated by spaces):
EMA name@domain text-of-your-email
Example: in order to send an email to john@..., do the
following:
EMA john@... text-of-your-email
if your phone cant print @ replace it with a !
EMA johon!doe.com text-of-your-email
And then send this message to the folloving number:
+39 338 8641732
Free SMS Center numbers
From your telephone you can send SMS messages of 160
char. max. to another GSM phone
Your message will be sent through an SMS Center
(usually the one that gave your provider)
You pay a little fee depending of your provider, BUT
YOU WILL HAVE TO PAY something
In order for sending SMS without paying anything, you
got to change your SMS Center number with these one
+491722270300 or +358405202999 or +352021100003
Codes (that they dont tell you in the manual)
To check the IMEI (International Mobile Equipment
Identity) type: *#06#
Information you get from the IMEI:
XXXXXX XX XXXXXX X
TAC FAC SNR SP
TAC = Type Approval Code (first 2 digits = country
code).
FAC = Final Assembly Code (For Nokia phonfiltered=10).
SNR = Serial Number.
SP = Spare (always SP=0).
To check the phone's software (firmware revision
information) type: *#0000# ( or for some phones outher
then Nokia 61XX you can try *#model nummber# ex. for
8110 *#8110#)
Information you can get from the phone's software
version:
V 3.14
28-11-97
NSE-3
1st line: Software version.
2nd line: The date of the software release.
3nd line: Phone type, .
Some versions and dates:
V 3.14 28/11/97
V4.33 11/03/98
V 4.73 22/04/98
V 5.24 14/9/98
Pin-Out Diagram for the 6110
1 - VIN CHARGER INPUT VOLTAGE 8.4V 0.8A
2 - CHRG CTRL CHARGER CONTROL PWM 32Khz
3 - XMIC MIC INPUT 60mV - 1V
4 - SGND SIGNAL GROUND
5 - XEAR EAR OUTPUT 80mV - 1V
6 - MBUS 9600 B/S
7 - FBUS_RX 9.6 - 230.4 KB/S
8 - FBUS_TX 9.6 - 230.4 KB/S
9 - L_GND CHARGER / LOGIC GND
Revealing Headphone and Car-Kit Menus
Think about this: If you do these tricks the new menus
can not be erased after the procedure. But it's not
dangerous or harmful for your phone
To enable the headset-function, you have to
short-circuit the "3" and "4". After a short time
there is "Headset" on the display Now, menu 3-6 is now
enabled!
To enable the carkit-function you have to
short-circuit the "4" and "5". After a short time,
"Car" is shown on the display and the menu 3-7 is
enabled!!
This Trick is for you how want to hear more then your
supposed to !
If you short-circuit the left and the right contact
with the middle contact ("3", "6" and "9") the Nokia
Software hangs! The profile "Headset" will be
activated. Before you do this, just active the "auto
call receive" function in the headphone profile and
set the ringing volume to "mute" Now you can use your
phone for checking out what people are talking about
in a room. Place the phone somewhere stratidic and
call your phone! The phone receives the call without
ringing and you can listen to what people are talking
about! .....gr8...
Serial numbers on your 6110
For more info type: *#92702689#
The first screen gives you the serial and IMEI number.
Then there is the Date of Manufacture: ex. Made 1297
Then there is the Purchasing Date: ex. Purchasing Date
0298
Then there is the last Repair Date: ex. Repaired: 0000
Note: you must turn off the phone to exit after this
test, because of the last function, "transfer user
data" which doesn't work as "standard"....You can use
this mode only to transfer all Calender, Profile and
Callers Group Information to another phone (eg. if you
are replacing phone or configuring phones for use
within your company or when a particular phone doesn't
works correctly )
Activating and deactivating EFR and HFR, on your 6110
*3370# to activate Enhanced Full Rate - Makes calls
sound better, but decreases the battery life by about
5%.
#3370# to deactivate Enhanced Full Rate
*4720# to activate Half Rate Mode - Drops call
quality, but increases battery life by about 30%.
#4720# to deactivate Half Rate Mode....
