Installation of a range extender is the first step to build a solid and secure home network. But how it is possible? Once you have installed it, how would you get a high-speed of the Internet everywhere in the house? Have you done all the process correctly? Have you gone through mywifiext[/b]? Follow the following guidelines to get the right extender configured for a safe, secure, and a reliable network.
Netgear Range Extender Setup[/b]
First of all, we would like to insist our valuable users, perform the task of extender setup with a calm and peaceful mind. No need not to worry, it is not a piece of cake that you cannot have it. We are always there for our valuable users to help them in any manner. Hope you are now ready and relax to execute the following task.
· Where have you unboxed your range extender? Is it nearby the router or far away from it? Don’t worry, a little distance will be applicable.
· After that, you have to plug them in and see when the LED lights on your range extender start blinking.
· For mywifiext login[/b], you have to take help of an Ethernet cable and connect your computer physically and properly with it. Don’t worry, this is just a temporary wiring.
· Make sure that your web browser is clear from browsing history and malware. Once you have done with this process, open a web browser and type mywifiext.net[/b] into field of the address bar.
· Did you see mywifiext.net error[/b]? Don’t worry. Just shut down your system for a short while and after restarting, try login from another web browser.
Note[/b]: For mywifiext.net Setup, you would acquire default details of username and password. And the default login credentials can easily be obtained by an expert on toll-free number
Alternatively, you can also go with some below-given steps for the right router configuration for a secure WiFi (wireless) network.
1. [/b]Connect your Router to the Modem[/b]
Don’t forget to use the latest firmware of router and the modem. You will see a port at the back of the router (LAN/ WAN/ Internet). You have to connect this port to your existing modem with the use of an Ethernet cable. Be certain that both the router and the modem are properly powered and enabled.
2. [/b]Connect your Computer to a Router[/b]
This would be the most important step to configure your router and spread its reach of the Internet to the far corner of the house. Well, connecting a computer with the help of an Ethernet cable will allow you to fiddle/ mess with wireless settings without any loose connection, signal breakage, or poor connectivity.
3. [/b]Installation of the Router Software[/b]
Remember, not every router comes with inbuilt software. Similarly, if your router has the feature, then install it on your computer that is physically connected with the router. Well, making use of the bundled software makes setting of the router more convenient.
4. [/b]Open the Router’s Configuration Page[/b]
Suppose, if your router didn’t come with any inbuilt software, then you will acquire to connect to the configuration page of the router with the help of a web page. So, what you are going to do, open a web browser and type the IP address of your router into field of the address bar. After that, you will be prompted to enter username and password (default) in the required fields.
5. [/b]Spot your Router[/b]
To achieve the best possible signals, place your router at the very central location of the house that supposes to be clear from the obstruction (interference) creating devices like Bluetooth speaker, electronic gadgets, treadmill, microwaves, baby monitors, security alarms, and metal appliances. If you have a large house, consider adding a second router or a range extender to your existing device. Also, keep your device away from the reach of neighboring or public WiFi.
Ask for any help to our team of finest technicians in the world on a toll-free number mentioned above.