Three IPO Settings - quality sign Reception during altering Band conditions

In the ft DX 3000, the combination of its excessive DX balance and excessive accuracy forty MHz TCXO (± 0.5ppm, -10 °C ~ +60 °C), and it is DDS create the primary frequency of this radio, and is locked to the PLL-IC and VCO immediately. This circuit development and method creates the best possible high-quality regional sign, with sophisticated S/N efficiency. This means the receiver noise ground is stored shrink, and realizes the first-class blocking off dynamic variety at 2 kHz IP3 performance.

3-step IPO settings permit the operator to select probably the most proper reap for high-quality signal reception. This type of decisions presents sophisticated amateur radio receiver performance and the quality viable communications with changing band stipulations.

The IPO (Intercept factor Optimization) is chosen via a manage change placed on the entrance panel. The IPO resolution determines the reap of the RF amplifier. The obtain atmosphere is very potent in optimizing the receiver performance, depending on the antenna and the communiqué propagation stipulations. The IPO, the ATT and one stage of the RF amplifier are used to optimize the sign phases which are dispatched to the mixer. This is above all essential for HF low-band operation. The "AMP 1" uses one RF amplifier stage, and maintains a better steadiness between the sensitivity and the receiver performance ( around 10 dB). Furthermore, "AMP 2" uses two levels of the RF amplification and might obtain greater sensitivity (the obtain is round 17 dB); anything principally foremost on the 6 and 10 meter bands.

High first-rate Audio with Punch

The modulation circuit of the toes DX 3000 utilizes digital version operational modulation, which creates perfect high high-quality transmission audio.

•Microphone Amplifier that entails Parametric Equalizer

The modulation circuit of the toes DX 3000 utilizes the digital variation operational modulation variety, which creates best excessive best transmission audio. This radio has a parametric equalizer that makes viable versatile adjustment of the TX audio first-class by means of aligning the TX band audio spectrum. The parametric equalizer can alter the Low, Mid and high a part of the audio individually. This three stage parametric equalizer can generate excessive excellent TX audio sound due to the fact that it may be tuned in element…without sacrificing the audio dignity. IF DSP Speech Processor – DX’er and Contester proven .

Conclusion:

The SSB Speech Processor makes use of IF digital sign processing to expand the intelligibility of the transmitted sign in the course of weak sign crowded conditions.
 
Back
Top